招標項目名稱：惠州25-4油田綜合調整/惠州19-6油田5d井區開發項目注水泵橇（往復式）
Project Name: HZ25-4 oil field comprehensive adjustment/HZ19-6 oil field 5d area development Project water injection pumps (reciprocating)
招標編號（Bid No.）：0704-2340JDCP5594
日    期：2025年3月21日
Date : March 21, 2025
 
中化建國際招標有限責任公司（以下稱為“招標代理機構”）受中海石油（中國）有限公司深圳分公司（以下稱為“招標人”）委托，就惠州25-4油田綜合調整/惠州19-6油田5d井區開發項目所需部分貨物及相關服務進行國際公開招標�，F(xiàn)邀請投標人對下列貨物和服務提交密封投標：
CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted by CNOOC China Ltd. Shenzhen (hereinafter referred to as “Tenderee”), intends to purchase the Goods and the relevant services required under the project of HZ25-4 OIL FIELD COMPREHENSIVE ADJUSTMENT/HZ19-6 OIL FIELD 5D AREA DEVELOPMENT by International Competitive Bidding. Bidders are kindly requested to provide the following Goods and services with sealed bids.
 
1.  招標條件
Bidding Conditions：
項目概況：5套注水泵橇（往復式）安裝在HZ19-6DPPA平臺的底層甲板。
Project Summary：Five (5) sets of Water Injection Pumps Skids (Reciprocating) shall be installed on the Lower Deck of HZ19-6DPPA platform.
資金到位或資金來源落實情況：已落實。
Source of Funds: yes
項目已具備招標條件的說明：已具備。
Description of Prepared Bidding Conditions: yes
 
2.  招標內容：Bidding Contents: 
Bidding Contents: Five (5) sets of Water Injection Pumps Skids (Reciprocating)
  貨物名稱：注水泵橇（往復式）              
Name of Goods: Water Injection Pumps Skids (Reciprocating)
  
數量：__5_套_
Quantity: ___Five_(5)_sets__
  
主要技術規格：往復式注水泵，排量60m3/h，吸入壓力41~51kPaG，排出壓力26500kPaG
Main Specifications: Water injection pump (reciprocating), Capacity 60m3/h, Suction Pressure 41~51kPaG, Dis. Pressure 26500kPaG
  
交貨期和交貨地點：
Delivery Schedule & Destination of delivery: 
從中華人民共和國關境內提供的貨物：中標通知書簽發后，5臺注水泵橇（往復式）10個月以內交貨，交貨地點為青島/珠�；蚬�司其他指定的中國大陸地址。
For goods offered from within PRC customs territory: Five (5) sets of Water Injection Pumps Skids (Reciprocating) need to be delivered within 10 months after NOA(Notifacation of Award) issued, the delivery address is Qingdao/Zhuhai or other address in Chinese Mainland designated by the Company.
從中華人民共和國關境外提供的貨物: 中標通知書簽發后，5臺注水泵橇（往復式）10個月以內交貨，交貨地點為DAP公司指定的中國大陸公共碼頭（INCOTERMS 2010）。
For goods offered from outside PRC customs territory: Five (5) sets of Water Injection Pumps Skids (Reciprocating) need to be delivered within 10 months after NOA(Notifacation of Award) issued, the goods shall be DAP Chinese Mainland public wharf, P. R. of China designated by the Company, INCOTERMS 2010.
 
 
3. 對投標人的資格和業績要求：
Requirements for Qualification and reference of Bidder:
 
（1）資格要求 
Requirements for Qualification of Bidder
A.★制造商要求:
所投注水泵（往復式）為境內產品：投標人需是注水泵（往復式）的制造商。
所投注水泵（往復式）為境外產品：允許注水泵（往復式）的制造商或取得注水泵（往復式）制造商唯一授權的成撬商或代理商投標。
一個制造商對同一品牌同一型號的注水泵（往復式），僅能委托一個成橇商或代理商參加投標。
投標人為代理商或成撬商時，應得到本次投標注水泵（往復式）制造商的唯一合法授權，并需在投標時提供以下材料（制造商代表簽字或蓋制造商代表人名章或蓋制造商公章）：
1）在有效期內注水泵（往復式）制造商唯一授權書原件。對于投標文件中提供制造商授權書的中標候選人，中標候選人公示期間將公示其制造商授權信息。投標文件中提供制造商授權書的中標候選人應在中標候選人公示后3個工作日內將制造商授權書原件（簽字或人名章或公章均須為原件，不接受掃描打印文件）送達招標人聯系人進行核驗，對于國外制造商授權書原件，建議投標人提前準備以滿足核驗原件期限要求。投標文件中提供的制造商授權書可在制造商官方網站上查詢并核驗一致的或紙質投標已遞交制造商授權書原件的，可免于送交原件核驗。核驗結果不一致的，將按照提供虛假投標資料處理；未能在規定期限內提供原件的，將視為不如實提供材料處理。上述兩類情況將取消中標候選人資格及中標資格，并按照中國海油相關制度規定給予禁用等處理；
2）注水泵（往復式）制造商提供承諾函（格式自擬），承諾投標所投產品為制造商工廠生產。
A. ★Manufacturer requirement:
Water Injection Pumps (Reciprocating) Offered from within the PRC Customs Territory: Bidders must be the manufacturer of the Water Injection Pumps (Reciprocating).
Water Injection Pumps (Reciprocating) Offered from within the PRC Customs Territory: The manufacturer of the Water Injection Pumps (Reciprocating) or the sole authorized contractor or agent of the Water Injection Pumps (Reciprocating) manufacturer is allowed to bid.
A manufacturer can only appoint one skidder or agent to participate in the bidding for the same brand and model of the Water Injection Pump (Reciprocating).
When the bidder is an agent or contractor, they shall obtain the sole legal authorization of the manufacturer of the water injection pump (reciprocating) for this bidding, and shall provide the following materials at the time of bidding (signed by the manufacturer's representative or stamped with the manufacturer's representative's name seal or official seal):